2018 Halloween Classic

ByErik

2018 Halloween Classic

October 19, 20, and 21, 2018 in Brunswick, OH

Registration will open on RCSignUp at 7:00PM EDT on Tuesday, August 21! Don’t be late! This event has sold out in under two hours!

As of September 4, the event is sold out! Check RCSignUp for up-to-date registration openings.
https://www.rcsignup.com/events/displayEvent.cfm?ID=6541

You only need to register for one class to secure you spot. We will reach out to you via email for your class entries in the coming weeks. We will need an accurate count of entries by class so we can rent the appropriate number of Can-Am motors. If you plan to run additional classes that you don’t register for on RCSignUp, make sure to watch your email!

Download the event flyer HERE

Entry Fees:

  • First Class: $60 (Includes t-shirt and bottle of SXT)
  • Second class: $50
  • Third class: $30
  • Each Can-Am class will require a $25 motor rental fee. Motor must be returned after the mains on Sunday.

Tires

  • Stock and Super Stock Touring Car: Jaco Blues – $25/set. Max of three (3) sets.
  • Stock 1/12th Scale: BSR stripe – $20/set. Max of five (5) sets.
  • For all other classes, please see rules below.

Classes: (More information on Can-Am can be found at www.canamrc.com)

  • Can-Am Stock TC
  • Can-Am Super Stock TC
  • Can-Am USGT
  • Can-Am F1
  • Can-Am Stock 1/12th Scale
  • Can-Am Super Stock 1/12th Scale
  • Can-Am WGT-R
  • VTA
  • Mod 1/12th Scale
  • Mod TC
  • Tamiya Euro Truck

Schedule:

  • Thursday 10/18
    • 6:00PM to 9:00PM – Pit setup. Track will be closed.
  • Friday 10/19:
    • 8:00AM to Noon – Open Practice
    • Noon to 8:00PM – Controlled Practice
    • 8:00PM to 10:00PM – Late arrival practice (If you run before 8:00PM, you do not qualify for late practice.)
  • Saturday 10/20:
    • 7:00AM – Doors Open
    • 7:15AM – Rocket round of practice by class
    • 8:00AM – Round 1 of qualifying begins. We will run until all three rounds of qualifying are complete.
  • Sunday 10/21:
    • 7:00AM – Doors open, open practice
    • 8:00AM – Round 4 of qualifying begins then move right into the mains.

Hotels:

  • Quality Inn
    1435 S Carpenter Rd, Brunswick, OH 44212
    (330) 273-1112
    Use discount code: LNORC
  • Red Roof Inn
    17555 Bagley Rd, Middleburg Heights, OH 44130
    (440) 243-2441
    Use discount code: VP# 624051

Rules:

  • NORCAR only supports “two wire” transponders. This includes the MyLaps RC4 Hybrid and MRT.
  • All general NORCAR club rules apply. Click HERE for details.
  • Traction compound: SXT Regular (1 bottle free with first entry) All other SXT compounds are allowed.
  • All Can-Am rental motors will have female 3.5mm bullets permanently attached to the motor. They may not be removed and racers are not allowed to solder wires to the motors. All racers running any Can-Am class must have 3.5mm male bullets on their ESC wires.
  • Can-Am motors must be removed from the vehicle and turned in at the end of each day. Motors cannot leave the track facility!
  • Can-Am motors must be returned after your main. Any motor that is damaged (including stripped threads), tampered with (including removing paint marks and/or stickers), or modified in any way will result in the racer having to pay the full retail cost of the motor.
  • ESC’s will be spot checked throughout the day to make sure ROAR legal firmware is installed. v4.2 for Hobbywing and v258 for Tekin are the latest ROAR legal firmware updates for those ESC’s.
  • Can-Am Stock TC
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hard case 2S
    • Gearing: Can-Am Minimum FDR 5.40
    • Tires/Rims: Handout
    • Body: ROAR approved TC2
    • Maximum Battery Voltage: 8.40v
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1350g minimum
    • Maximum Width: 190mm
    • Minimum Body Height/Wing: 130mm minimum. Sitting on 20mm blocks. No part of the wing may extend above the roofline of the body.
  •  Can-Am Super Stock TC
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hard case 2S
    • Gearing: Can-Am Minimum FDR 6.20
    • Tires/Rims: Handout
    • Body: ROAR approved TC2
    • Maximum Battery Voltage: 8.40v
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1350g minimum
    • Maximum Width: 190mm
    • Minimum Body Height/Wing: 130mm minimum. Sitting on 20mm blocks. No part of the wing may extend above the roofline of the body.
  • Can-Am USGT
    • USGT rules apply (tires subject to compliance inspection)
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hard case 2S
    • Gearing: Can-Am Minimum FDR 4.40
    • Tires/Rims: Ride RIE24025 tires and inserts (Available through Gravity R/C or NORCAR. Bring your own.)
    • Body: No WGT, ROAR TC2, Truck or bodies intended for oval or off-road. Bodies my completely cover the tires.
    • Maximum Battery Voltage: 8.40v
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1380g
    • Maximum Width: 200mm
    • Minimum Body Height/Wing: Any “scale” molded wing can be used. Lexan wings are limited to a 10mm maximum height including the side dams.
    • Minimum Body Weight: 95 grams. No weights may be attached to the body to make minimum weight.
  • Can-Am F1
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hardcase 2S
    • Gearing: Can-Am Fixed 92T 64P Spur, 28T Pinion
    • Tires/Rims: CRC or TCS on UF1 style wheel (single nut retention front and rear) Bring your own.
    • Body: UF1 approved, Year 2000 or newer bodies
    • Maximum Battery Voltage: 8.40v
    • Minimum Ground Clearance: 4mm
    • Minimum Weight: 1050g
    • Maximum Width: 190mm
    • Minimum Body Height/Wing: Rear wing must be no higher then the body’s air “scoop”
  •  Can-Am Stock 1/12th Scale
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode
    • Battery: Any ROAR approved hardcase 1S
    • Gearing: Fixed – 56t pinion and 72t spur (Gears donated by CRC)
    • Tires/Rims: Handout
    • Body: ROAR approved 1/12 scale GTP. Click HERE for current ROAR approvals.
    • Maximum Battery Voltage: 4.20v
    • Minimum Ground Clearance: 3mm
    • Minimum Weight: 730g
    • Maximum Width: 172mm
    • Minimum Body Height/Wing: N/A
  • Can-Am Super Stock 1/12th Scale
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode
    • Battery: Any ROAR approved hardcase 1S
    • Gearing: Can-Am Fixed Spur 88T 64P, Fixed Pinion 35T 64P
    • Tires/Rims: Open
    • Body: ROAR approved 1/12 scale GTP. Click HERE for current ROAR approvals.
    • Maximum Battery Voltage: 4.20v
    • Minimum Ground Clearance: 3mm
    • Minimum Weight: 730g
    • Maximum Width: 172mm
    • Minimum Body Height/Wing: N/A
  • Can-Am WGT-R
    • WGT-R rules apply
    • Motor/Rotor: Can-Am handout rental motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hard case 1S
    • Gearing: Can-Am  Fixed Spur 92T 64P, 36T Pinion
    • Tires/Rims: CRC spec or TCS tires. Fronts on front, rears on rear. Bring your own.
    • Body: Approved body list only bodies must not be cut lower than the trim line therefore controlling height. Bodies that look slammed will be checked.
    • Maximum Battery Voltage: 4.20v
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1025g
    • Minimum Body Weight: Bodies must weigh a minimum of 95 grams with the weight comprised of the body (all pieces and wings etc), paint and stickers. No pieces of weight will be allowed to assist in making the 95 gram minimum.
  •  VTA
    • USVTA rules apply (including driver figure, tires subject to compliance inspection)
    • Motor/Rotor: ROAR Approved 25.5T
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hardcase 2s LiPo with a maximum of 6000mah rating.
    • Gearing: Open
    • Tires/Rims: Protoform VTA Specific Tires (Front 10140-00, Rear 10139-00) mounted on VTA wheels. Front on front, rear on rear. Bring your own.
    • Body: USVTA approved, see their list.
    • Maximum Battery Voltage: 8.40
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1450g
    • Maximum Width: 200mm
    • Minimum Body Height/Wing: Wing as included with body and mounted in designed location
  • Mod 1/12th Scale
    • Motor/Rotor: Any ROAR approved mod motor
    • ESC: Any ROAR approved non-timing ESC in its approved “Blinky” mode.
    • Battery: Any hardcase 1S
    • Gearing: Open
    • Tires/Rims: Open
    • Body: ROAR approved 1/12 scale GTP. Click HERE for current ROAR approvals.
    • Maximum Battery Voltage: 4.20v
    • Minimum Ground Clearance: 3mm
    • Minimum Weight: 730g
    • Maximum Width: 172mm
    • Minimum Body Height/Wing: N/A
  • Mod TC
    • Motor/Rotor: Any ROAR approved mod motor
    • ESC: Any ROAR approved ESC
    • Battery: Any hard case 2S
    • Gearing: Open
    • Tires/Rims: Handout
    • Body: ROAR approved TC2
    • Maximum Battery Voltage: 8.40v
    • Minimum Ground Clearance: 5mm
    • Minimum Weight: 1350g minimum
    • Maximum Width: 190mm
    • Minimum Body Height/Wing: 130mm minimum. Sitting on 20mm blocks. No part of the wing may extend above the roofline of the body.
  • Tamiya Euro Truck “track class”
    • Tamiya TT-01 based Euro Semi Truck kits only
    • Must use kit supplied motor and ESC
    • Only upgrade allowed is ball bearings
    • Must use kit supplied pinion gear
    • Must use kit supplied tires and full body
    • 2S LiPo battery. Max capacity of 6,000mAh. (Reedy pack recommended)
    • Max voltage of 8.40V
    • Tires may be glued on the sidewalls ONLY. No glue may be applied to the treads.

About the author

Erik administrator